- 首頁
- 產品中心
-
-
- 集成電路 Integrated Circuits (ICs)
- 模擬引擎 Analog Engine
- 模擬開關 Analog Switch
- 音頻放大器 Audio Amplifiers
- 音頻轉換器 Audio Converters
- 音頻開關 Audio Switch
- D類放大器 Class D Amplifiers
- 比較器 Comparators
- 數字信號處理器 Digital Signal Processors (DSP)
- 麥克風增益控制器 Microphone Gain Controllers
- LED驅動器 LED Drivers
- 線路驅動器 Line Driver
- 平衡線路接收器 Balanced Line Receivers
- MEMS麥克風 MEMS Microphones
- 麥克風前置放大器 Microphone Pre-amplifiers
- 運算放大器 Operational Amplifiers
- 石英振蕩器驅動器 Quartz Oscillator Drivers
- 壓電驅動器 Piezo Drivers
- 通訊 Telephony
- 壓控放大器 Voltage Controlled Amplifiers (VCA)
- 音量控制 Volume Control
- 晶振IC Crystal Oscillator IC's
- 傳感器 Sensor Signal Interface
- 集成電路 Integrated Circuits (ICs)
-
-
- 代理品牌
- 應用領域
-
- 關于我們
- 新聞資訊
- 聯系我們
- 企業店鋪


ECF20N25A 塑封MOSFET大功率音頻功放對管
- 專為音頻放大器應用而設計
- 高導熱性
- 優異的頻率特性
- 集成保護二極管
- 不受電流集中的影響,因此對電破壞具有很高的抵抗力。
- 固有的防止短路故障條件和熱失控的溫度特性
技術規格
| 類型 Type | Nch |
| 漏-源極電壓 Drain Source Voltage | 250V |
| 漏極電流 Drain Current | 16A |
| 柵-源極電壓 Gate-Source Voltage | ±14V |
| 功率 Power | 250W |
詳細描述
EXICON Mosfets 專為高功率線性應用而設計。
它們提供高電壓能力、高轉換率和低失真,使其成為音頻放大器設計的理想選擇。免于二次擊穿和熱失控 使它們非常可靠,無需保護電路。這些優勢加上寬帶寬、低驅動要求和易于并聯,使得具有出色聲音特性的穩健放大器的簡單構造成為可能。
注意 ECF20N25 提供顏色編碼,以便客戶在需要時改進匹配。當許多 MOSFET 并聯時,這在高功率放大器中特別有用。
編碼是在 Vgs=2.0V 的測試電壓下導出的
黑色 <1.6 Ids
棕色 1.6 - 2.0Ids
紅色 2.0 - 2.4Ids
橙色 2.4 - 2.8Ids
綠色 >2.8Ids
我們將嘗試根據要求提供特定的顏色代碼,但這不能保證。
EXICON Mosfets have been designed specifically for high power linear use.They offer high voltage capability, high slew rate and low distortion, making them the ideal choice for audio amplifier design.
Freedom from secondary breakdown and thermal runaway?make them extremely reliable and remove the need for protection circuitry.These advantages together with wide bandwidth, low drive requirements, and ease of paralleling make it possible for the simple construction of robust amplifiers with excellent sonic characteristics.
Note.?The ECF20N25 is supplied colour coded to enable customers to improve matching if required. This is particularly useful in high power amplifiers when many MOSFETS are connected in parallel.
Coding is derived at a test voltage of Vgs=2.0V
Black?<1.6 Ids
Brown?1.6 - 2.0Ids
Red?2.0 - 2.4Ids
Orange?2.4 - 2.8Ids
Green?>2.8Ids
We will attempt to supply specific colour codes on request but this cannot be guaranteed.




